The bag machine can realize energy saving and efficiency.

The bag machine can realize energy saving and efficiency.

Usually, people can achieve the goal of positioning precision and energy efficiency by driving the driving unit and grasping arm through the servo motor. At the same time, the grasping system and the shot bag unit also play an important role. They can safely cover the material bag of the bag rack to the filling mouth. On the other hand, you can see, grasp arm and shoot bag unit drive technology and double servo drive electric coupling is also very important, they can be used to minimize the number of mechanical components. The vibration of the equipment can also be reduced through mature kinematics. Therefore, the service life of the equipment has been greatly extended. Ensure that the low-maintenance operation is the oil-free vacuum nozzle. You can see, in both support is to grasp the arm, it is very quiet at run time, at the same time, its bagging ability is very strong, in general, 6000 bags per hour is its ability of bagging.

For this type of bagging machine, it can be used for different types of square foot valve pockets, PP bags, PE bags or paper bags. 350 to 650 mm is the length of the material bag. The width of the bag is 230 to 550 mm, which is the width of the material bag, 80 to 160 mm is the width of the valve port. The new device has a strong processing power, and 3,000 bags per hour is its processing power. If it’s efficient, it can handle up to 6,000 bags/hours.

Do you see an optional pneumatic turntable? It has a 60-degree swing, and if it’s an electric rotary table, it can swing up to 150 degrees. The design of the empty bag is modular design, and at the same time, its length is 2 meters to 9 meters, and this length is adjustable. On the left or right, you can install drivers and limit blocks. If the filling mouth is highly different, filling the empty bag is also ergonomic.

As you can see, the burman bag machine is also applicable to the flat side valve pocket.

The burman bagging machine is suitable for the flat side valve pocket. It has two kinds of structure to choose from. At the same time, we all know that for the position of the bag unit, they are also different.